JM20-YJ(Radial riveting machine)
Precision stroke & Pressure control riveting machine

Characteristics:

■Medium sized with vertical style

■Processing Dia.Φ9mm (solid steel rivet)
■ PLC control
■Working mode selection
■Closed loop control, repeat accuracy ±0.02mm

■Hydraulic drive with stepless regulation

■Security mask covered rotating part

■Workbench adjustable with large space available

■Setting riveting time as will, manual ,auto switching

■Can reserve hydraulic connector for fixture

■Hydraulic system and fuselage can be separated

     Features of riveting machine: 1. Small PLC controller realizes closed-loop control, grating displacement sensor, and real-time detection of riveting head position. At the same time as participating in program control, real-time position data will be displayed on the main interface, with a position control repetition accuracy of plus or minus 0.02mm. The hydraulic system has added pressure sensors and proportional valves, which generally have pressure compensation performance. Therefore, its output pressure and flow rate can be unaffected by load changes, making its pressure control repeatability accuracy within ±3%. 2. The device has three control modes: time control, position control, and pressure control. 3. There are slight upward and downward movements, as well as single riveting and cyclic riveting. The control system of this machine reserves multiple attachments and auxiliary equipment output interfaces, in addition to automatic lubrication pumps, safety light curtains, two handed buttons, and mobile fixture fixtures for integrated control of the entire machine.

Parameters：

▲Riveting diameter                          Φ4mm~Φ20mm

▲Pressure                                        65Kn  accyracy ±3%

▲Oil pump output                             2.5MPa

▲Stroke                                            30mm  Repetitive accuracy±0.02mm

▲Working space                                265mm

▲Workbench movable                       265mm

▲Positioning hole diameter               Φ26

▲Throat depth                                    225mm

▲Riveting pin length                           62mm

▲Workbench size                               430mm×290mm

▲Power                                              4.4Kw

▲Pump moter rotation direction          Clockwise (top view) 

▲Physical size                                    1070mm×600mm×1930mm

▲Net weight                                        850Kg